D Rings installation
D Rings are the recommended hanging method for works presented with the gallery hanging system. Correct positioning on both sides of the artwork allows for a balanced, professional and secure installation.
Before installing the D rings, confirm which edge of the frame is the top. Correct orientation is essential for accurate hanging and alignment.
D rings must be installed 8 cm from the top edge of the frame, following the Espacio Gallery hanging system specifications.
Using a tape measure, measure 8 cm down from the top inner edge of the frame on both the left and right sides.
Make a small pencil mark on each side of the frame. These marks will indicate where the D rings should be installed.
Check that both marks are level and evenly positioned. Accurate measurements ensure a straight and secure hang at Espacio Gallery.
Place each D ring directly over the 8 cm mark. Make sure the ring is centred on the frame width and facing upwards.
Using a screwdriver or drill, fix the D rings firmly with the supplied screws. Ensure they are secure and do not move.
Confirm that both D rings are fixed at the same height and are fully secure. This prevents the artwork from hanging unevenly.
We recommend using standard D rings that are compatible with the Espacio Gallery hanging system. This ensures stability, safety and correct alignment when installing your artwork.
You can purchase suitable D rings via the link below:
amzn.to/453bQkX
This link is provided for convenience. You may purchase D rings from any supplier, provided they meet the required specifications.
| gallery_floor_plans.pdf | |
| File Size: | 242 kb |
| File Type: | |